Beijing Hownew Energy Technology Group Co., Ltd
Hownew Energy Technology Group Co., Ltd.
Add to Cart
ASTM A105 is a specification that covers forged carbon steel piping components for ambient- and higher-temperature service in pressure systems. This includes flanges, fittings, valves, and similar parts that may be used in pressure systems at elevated temperatures. The primary feature of ASTM A105 is its use for manufacturing piping components where high temperature and pressure resistance are crucial.
ASTM A105 components are generally used in the oil and gas, petrochemical, and chemical industries, among others. They are designed to handle both high-temperature environments and moderate changes in temperature. The standard specifies mechanical properties such as tensile strength, yield strength, and hardness. ASTM A105 steel is known for its good machinability and weldability, making it a versatile choice for engineering applications.
| Product Introduction
| Material | 20#,20G,ASTM A105,ASTM A234 WPB,ASTM A860 WPHY42,ASTM A860 WPHY46,ASTM A860 WPHY52,ASTM A860 WPHY56,ASTM A860 WPHY60,ASTM A860 WPHY65,ASTM A860 WPHY70,ASTM A420 WPL3,ASTM A420 WPL6 etc. |
| Manufacturing Standards | ASME/ANSI B16.9 MSS-SP-43 JIS B2311/2220 DIN2615/2616/2617 ISO 3419,ISO 5251 | |
| Wall Thickness | SCH5-STD-SCH XXS etc | |
| Outside Diameter | 1/2''-48''(Butt welding, seamless) 16''~72''(welding) |
ASME B16.9
| Nominal Size | Outside Diameter at Bevel | Length | Limiting Wall Thickness for Length E | ||
| DN | NPS | OD | E | E₁ | |
| 15 20 25 | 1/2 3/4 1 | 21.3 26.7 33.4 | 25 25 38 | 25 25 38 | 4.57 3.81 4.57 |
| 32 40 50 | 11/4 11/2 2 | 42.2 48.3 60.3 | 38 38 38 | 38 38 44 | 4.83 5.08 5.59 |
| 65 80 90 100 | 21/2 3 31/2 4 | 73.0 88.9 101.6 114.3 | 38 51 64 64 | 51 64 76 76 | 7.11 7.62 8.13 8.64 |
| 125 150 200 | 5 6 8 | 141.3 168.3 219.1 | 76 89 102 | 89 102 127 | 9.65 10.92 12.70 |
| 250 300 350 | 10 12 14 | 273.0 323.8 355.6 | 127 152 165 | 152 178 191 | 12.70 12.70 12.70 |
| 400 450 500 | 16 18 20 | 406.4 457.0 508.0 | 178 203 229 | 203 229 254 | 12.70 12.70 12.70 |
| 550 600 650 | 22 24 26 | 559.0 610.0 660.0 | 254 267 267 |
254 |
12.70 |
| 700 750 800 | 28 30 32 | 711.0 762.0 813.0 | 267 267 267 | ||
| 850 900 950 | 34 36 38 | 864.0 914.0 965.0 | 267 267 305 | ||
| 1000 1050 1100 | 40 42 44 | 1016.0 1067.0 1118.0 | 305 305 343 | ||
| 1150 1200 | 46 48 | 1168.0 1219.0 | 343 343 | ||
| Notes: 1)The configuration of the cap is normal ellipse. 2)Length E applies for the thickness not exceeding the Limiting Wall Thickness,Length E,applies for the thickness exceeding the Limiting Wall Thickness.For the caps with DN≥650(NPS26),they will be made subject to the sizes agreed between purchaser and manufacturer or be supplied according to manufacturer's size. | |||||