Beijing Hownew Energy Technology Group Co., Ltd
Hownew Energy Technology Group Co., Ltd.
Add to Cart
Product Introduction
A105 material is a type of carbon steel material, whose chemical composition includes elements such as carbon, silicon, manganese, phosphorus, and sulfur. A105 material has good weldability and processability, and is a common pipeline and valve material widely used in industries such as petroleum and power.
The characteristics of A105 material:
1. Excellent weldability: A105 material has a low carbon content and does not produce obvious pores and cracks during the welding process, making it easy to weld.
2. Good machinability: A105 material has high hardness and strength, but is easy to process and process.
3. Good corrosion resistance: A105 material has good corrosion resistance and can resist the erosion of most chemicals.
4. High temperature stability: A105 material can operate stably for a long time in high temperature environments and is not easily deformed by heat.
The purpose of A105 material:
1. Valve manufacturing: A105 material is a common valve material widely used in valve manufacturing in industries such as petroleum and power.
2. Pipeline manufacturing: A105 material is widely used in pipeline manufacturing in industries such as petroleum and power, with excellent pressure resistance and corrosion resistance.
3. Mechanical manufacturing: A105 material can be used to manufacture various mechanical parts, such as bearings, gears, bolts, etc.
In summary, A105 material is an excellent carbon steel material with good weldability, processability, corrosion resistance, and high-temperature stability, widely used in industries such as petroleum and power.
ASME B16.9
| Nominal Size | Outside Diameter at Bevel | Length | Limiting Wall Thickness for Length E | ||
| DN | NPS | OD | E | E₁ | |
| 15 20 25 | 1/2 3/4 1 | 21.3 26.7 33.4 | 25 25 38 | 25 25 38 | 4.57 3.81 4.57 |
| 32 40 50 | 11/4 11/2 2 | 42.2 48.3 60.3 | 38 38 38 | 38 38 44 | 4.83 5.08 5.59 |
| 65 80 90 100 | 21/2 3 31/2 4 | 73.0 88.9 101.6 114.3 | 38 51 64 64 | 51 64 76 76 | 7.11 7.62 8.13 8.64 |
| 125 150 200 | 5 6 8 | 141.3 168.3 219.1 | 76 89 102 | 89 102 127 | 9.65 10.92 12.70 |
| 250 300 350 | 10 12 14 | 273.0 323.8 355.6 | 127 152 165 | 152 178 191 | 12.70 12.70 12.70 |
| 400 450 500 | 16 18 20 | 406.4 457.0 508.0 | 178 203 229 | 203 229 254 | 12.70 12.70 12.70 |
| 550 600 650 | 22 24 26 | 559.0 610.0 660.0 | 254 267 267 |
254 |
12.70 |
| 700 750 800 | 28 30 32 | 711.0 762.0 813.0 | 267 267 267 | ||
| 850 900 950 | 34 36 38 | 864.0 914.0 965.0 | 267 267 305 | ||
| 1000 1050 1100 | 40 42 44 | 1016.0 1067.0 1118.0 | 305 305 343 | ||
| 1150 1200 | 46 48 | 1168.0 1219.0 | 343 343 | ||
| Notes: 1)The configuration of the cap is normal ellipse. 2)Length E applies for the thickness not exceeding the Limiting Wall Thickness,Length E,applies for the thickness exceeding the Limiting Wall Thickness.For the caps with DN≥650(NPS26),they will be made subject to the sizes agreed between purchaser and manufacturer or be supplied according to manufacturer's size. | |||||